ZX TM은 풍력 터빈 위에 설치하여 파워커브용 바람을 측정합니다.
ZX TM은 육/해상의 풍력 터빈에 설치하여 터빈 전방의 풍황을 원격으로 측정합니다.
Z풍력 터빈 블레이드 전체 넓이의 shear와 veer를 측정할 수 있으며,
REWS (Rotor Equivalent Wind Speed)를 정확하게 측정합니다.
또한, Power Curves, Yaw Alignment와 Wake Detection을 포함하는
Nacelle Transfer Function을 교정하는 산업계의 표준 측정방식을 제공합니다.
- 원격 풍황 측정 10 ~ 300+ meter
- 터빈의 독립적인 실제 전력성능 평가
- 터빈 전방의 정확한 풍황 관측으로 터빈의 움직임 자동 보정
- 산업계 표준으로 채택된 측정방식
- IEC Power Curve의 REWS 관측 (거리별 13개의 수직 슬라이스)
- 세계 모든 주요 터빈 플랫폼에 적용 가능
- 50Hz의 빠른 측정방식으로 블레이드에 의한 영향이 거의 없음
- 3 Year Warranty and Service Interval
ZX TM Turbine Mounted Wind Lidar Specifications
Measurement
Configurations |
3” Lidar optical head, 15 degree half-angle scan 10+ horizontal ranges with configurable dwell times 13 vertical slices at each range 10 to 400m+ ranges |
---|---|
Wind Characteristics |
Wind speed, shear, veer, wind yaw misalignment, turbulence, rotorequivalent wind speed (REWS) |
Scan & Data sample rate | Full rotor scan for REWS measurement50Hz / 20ms measurements |
Speed Range | 0.5 - 40 m/s (wind loading survivability to 70 m/s) |
Products
Weight |
Lidar Optical Head (LOH): 20 kg Lidar Control Unit (LCU): 22.5 kg Turbine Integration Kit (TIK): 33kg |
---|---|
Size |
LOH: 356 x 285 x 750 mmLCU: 190 x 490 x 500 mm Cable length: 10 m |
IP Rating |
LOH: IP 66 LCU: IP 65 Marine atmosphere compliant (IEC 60068-2-11) Operating humidity 0 to 95% RH |
Ambient temperature range | LOH: -30 to 50°C / LCU: -40 to 60°C |
Warranty and Maintenance |
3 year warranty No factory maintenance or calibration required during 3 year service period |
AC Power Requirements |
Standard climate (-10 to +40°C): 71 W Hot climate (+40 to +60°C): 280 W Cold Climate (-40 to -10°C): 210 W |
Access
Interfaces | Ethernet (RJ45) Wireless Access Point (A, B, G, H; 2.4 & 5 Ghz) Modbus (TCP) GSM Modem |
---|---|
Data Storage | 24months |
User Interface | Web-based interface via laptop, mobile or table (see opposite) |
Data Outputs | CSV Files Compressed (Optionally Encrypted) |
TimeStamp | GPS, Local time offset, NTP |